IN1016 Quick Start Guide

1. Mount the Unit

Fix the bracket to a ceiling or wall structure. Aim the lens at the floor (2.5–4 m height for a ~3 × 2.3 m interactive area) or at a wall. Ensure the unit is level; slight tilts are corrected later with keystone.

2. Connect Power

Connect the power cord to AC 100–240 V. The unit boots directly into the interactive system — no external player or PC is needed.

3. Adjust the Image

Use the remote: motorized focus until the image is sharp; keystone to square the image if the unit is not perpendicular to the surface.

4. Choose Contents

Open the content menu and select effects or games. Choose loop for unattended venues or on-demand for hosted sessions. Custom contents load from USB.

5. Verify Interaction

Step into the image. Effects should react under your feet or hands instantly. If a zone doesn't respond, see the interaction checklist.

Tips

• Keep the lens and sensor windows clean — wipe weekly with a dry microfiber cloth
• For large areas, connect units to a network switch for fusion — see the fusion setup guide